Products

Product Line

HY16F197B

Diagram

HY16F197B Diagram

Application Categories

  • Health care electronic devices
  • Process control
  • Strain gauge
  • Precision sensing system

Product Features

  • Digital Features:
  • Andes N801 32-bit MCU
    • One instruction per clock cycle
  • C complier & graphical development tool chain
  • 2.2V to 3.6V operating voltage range
  • -40℃ to 85℃ operating temperature range
  • Low power operation:
    • Run mode:0.6mA@CPU_CK=2MHz/2
    • Speed mode:5μA@LSRC=35KHz
    • Sleep mode:Typ.2.5μA
  • 64K bytes eFlash Memory
  • 8K bytes SRAM
  • Various timer (Support 4 channel 16-bit PWM)
    • 8-bit/16-bit timer
    • Multi-type PWM controller
    • Compare and capture function
  • Support EUARTx2/32-bit SPI/I2C(Master and Slave two communication modes) interface.
  • The hardware RTC supports calendar functionality (year/month/day/hour/minute/second and the alarm)
  • Supports up to 24+34 programmable digital IO function pin
    • 24 pins are GPIO pin
    • 34 pins are shared from LCD I/O pin
  • Analog Features:
  • An ultra low noise 24-bit ΣΔADC
    • Input referred noise down to 65nV
    • Optional 10/20/41/81/163/326/651/1302/2604/5208/10417Hz@ADCK=333KHz conversion rate of SPS
    • Input amplification gain up to 1~128
  • Supports the following four CPU oscillator frequency:
    • External High Speed Oscillator Max ,Up to 2MHz~16MHz@VDD3V
    • External Low Speed Oscillator Mode (LSXT)32768Hz
    • Internal High Speed Oscillator Max (HSRC),Optional 2MHz、4MHz、8MHz、16MHz
    • Internal Low Speed Oscillator (LSRC) 35KHz
  • Power management
    • Charge pump regulation
    • Built-in selectable voltage
    • 1.2V bandgap reference output
  • A 8-bit DAC
    • Monotonic guarantee
  • A rail-to-rail operation amplifier
    • 1MHz bandwidth, higher than 90dB gain
    • Programmable configuration: unit gain buffer, integrator…etc
  • Multi-function comparator
    • 16 level low battery detection
    • 8 touch key circuit support
    • 2μS De-Glitch filter
  • 4×36~6×34 LCD driver
    • Support 1/3, 1/4, 1/5, 1/6 duty @ 1/3 bias mode
    • Support R Type driver
    • Built-in Charge Pump voltage regulator circuits provide paragraph 5 of VLCD bias,3.43V,3.16V,2.93V,2.73V,or 2.55V